Kategorie: 3rd party

Added cutouts to the sides of peterstreasury3D’s Gloomhaven – HP/XP dial holder. They allow fingers to spin the dials more easily.

This is a simple adaptor I created to not always solder cables and usb plugs. These are expensive too.. Two single male Dupont connectors can be inserted and when it is pluged into a USB port you are able to harness power from it for any reason imaginable. I use them to power my Lattepanda and after several prints and improvements I can proudly share this very handy gadget. I think it will be interesting for Arduino stuff.
Have fun 🙂

!!! Always make sure you connect it the correct way !!!
I am in no way responsible for any damage that occurs with this part.

This version has a tighter fit and can reach deeper into the Ethernet port.
It’s a remix of https://www.thingiverse.com/thing:5191532

This Dock is a remix of neebick Display Dock to fit my USB-C Hub that I currently plan to use when I receive my steam deck.

Its a fairly easy print however you will need supports in some places and will need to have it angled on the print bed too fit smaller printers.

Where the hub goes in on the back is a fairly tight fit so it cant fall out of the loops easily.

USB Hub to go with this dock:
Amazon: Cable Creation 7 in 1 USB-C HUB

Printed with Sunlu Black PLA

Time-lapse of the print

Its a shoehorn holder
Head creds to Drivernator
Body creds to SheridanUA

I bought a new Samsung Galaxy Watch 4 Classic (46mm) and I wanted a charging doc for it. I printed JSC’s Apple Watch Charging Dock for a friend a while ago and really liked it.

He was kind enough to post the Fusion 360 file so I modified it for my watch.

I included the STEP and modified f3d file too.

Slight update: I made the USB connector channel a bit wider as it was a bit tight and I had to file it down after printing.

Yet Another update: I made a V3. Wider USB channel, higher USB cable path, and a curved rest for the watch. I left V2 here too with the STEP and f3d file for both versions. (Yellow PLA is V2, Black PETG is V3)

Now a V4 for people with Brass inserts. I didn’t like the USB cable coming loose and I had spare inserts and countersunk M4 screws. STEP and f3d file attached.

A case for the Xiaomi Wowstick that fits all the bits and more. Bits are can be held on with magnets for extra security.

Check out this model and my other work on PrusaPrinters

• Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare)
• Holds the magnetizer/demagnetizer thingy
• Has a small pocket for carying miscellaneous items, plus 7 more slots in the lid, where you can put screws when working
• Magnets can be added mid-print to hold the bits in place more securely
• Easily editable parametric design for Fusion 360

This is a remix of https://www.thingiverse.com/thing:4732869.

The original lids of the monster boxes where just a little bit to small. The initiative tokens tend to vary in size. I made the lids 0.5mm broader such that my initiative markers fit and dont get scratched.

Oh, and I added some text on one side of the box.

Print four of the character trays from here:
https://www.thingiverse.com/thing:4612926

I had to redesign the complete rest, because the initiative token are longer in the german edition. I made small boxes for all monsters (cards & token). The ‚lid‘ is the initiative token. The other cards come with more boxes, here and there it is a tight fight, but during the game more and more cards get added to the characters.
All other tokens are piled up in the three bowls (Schale_1, Schale_2, Token) which stack nicely.

I love the new expansion for Gloomhaven (Jaws of the Lion), but it is a really complex game with tons of components that can take a long time to unpack/repack before/after each game. I made this organizer/gameplay tray to keep everything organized and minimize set up time!

Everything fits in the box, but it does raise the lid by about 2-4 mm.

I have only stored this box horizontally, so I don’t know if the pieces will shift out of their trays if you store it vertically, but if you store it tightly, then everything should stay in place.

Note: the wedge and clip are for the enemy trays (print 2 of these, btw). The clip keeps the 2 halves of the enemy tray together, while the wedge makes it slightly more easy to get monster cards out of the tray.

Enjoy!