Aktuell ist das neue alt!
3D printed ball clock
The clock is based on a design from the ’70s by Harley Mayenschein, using marbles on three different rails to give a readout and to track time.
Although my design is more optimized to be smaller and uses an original lifting system using a bar mechanism.
It is quite accurate, it has an error of 6 seconds in 24 hours
In the following video the operation and assembly of the clock is explained:
www.youtube.com/watch?v=r… (...)
Ich wollte einen schönen unauffälligen Platz für meinen Saugroboter haben. Hatte noch eine 5mm dicke Glasplatte. Also schnell Füße konstruiert und ab unter die Stehlampe.
Die Platte ist rechteckig und ist 47×30 cm. Man kann natürlich auch andere Maße nehmen. (...)
Somewhere I’ve heard that batteries don’t like it when they are constantly charged at 100%.
Therefore, we have always only placed our four Fritz!Fons on the charging station when the battery is down to at least 50%.
As a result, the phones are mostly located somewhere – usually far away from the charging station at a random location. (...)
Hi everyone!
This was an idea we had for the Mythic Mugs Graveyard Collection, but wasn’t able to squeeze in at the time.
It’s a detailed dice tower that can serve as a decorative diorama on its own. (...)
This is an 8 piece durable puzzle box made be hard to solve and easy to print. Any rigid material should work but 2, 5mm MAGNETS ARE NEEDED I used these magnets: tinyurl.com/yxr2maud
ASSEMBLY AND SOLUTION PDF’S IN THE DOWNLOAD (...)
it’s a model that I saw on facebook, I didn’t find any on thingivers so I copied it (not great)
update 13/01/2021 i resize the file
Some people wanted to make a PayPal tip for me but I couldn’t enter it in thinsgivers so I post a link here: paypal.me/fossion?locale…. (...)
BEFORE YOU PRINT
Three parts need to be printed in Vase Mode / Spiral Printing:
The LED Strip Holder, Diffuser, and Shade.
-The Shade should be printed with 3-4 bottom layers, which become the top of the lamp.
-The LED Strip Holder and Diffuser need to be printed with no top or bottom layers, they’re basically completely hollow, single wall prints which slot into the lines in the Base. (...)
improved version with larger head for better wire holding
This Thing is my version of Soldering cross Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! (...)
While this isn’t strictly a remix, I wanted to give “idig3d” credit for the inspiration. I created a soldering helping hands www.thingiverse.com/thing… but when I saw idig3d’s version, I liked the simplicity and faster build time. I thought I’d create one that was similar but had additional grooves and a tapered top. Here is my interpretation. (...)
First of all: this is by no means 100% “production ready”, it has its quirks to fix after printing, but it’s manageable and more or less easy too fix.
That being said, this is how it was done:
Measured the superb Diamond Select John Wick figure and decided to attach a brick wall with some neon-like electroluminescence wire as fake neon sign(s). First I had some dragon in mind, but that was too complex to pull off with EL Wire, so I looked around for other neon advertisement like images. The later found dragon head again was too finicky. But the chinese writing on the bottom “dragon” (hopefully haha) was fine. Then I stumbled over the “Tsingtao Beer” neon ad installment, which seemed doable, so I traced it in Fusion 360 to create a positive extrusion of the channels and holes needed, just like with the chinese writing before. (...)
Sofern Sie Ihre Datenschutzeinstellungen ändern möchten z.B. Erteilung von Einwilligungen, Widerruf bereits erteilter Einwilligungen klicken Sie auf nachfolgenden Button.
Einstellungen