This is a total remodel from the original stand
Did not like the original model as it is quit wobble when lay flatten
so I designed a version that can be folded into itself
60° stand, can hold phone up to 14.5mm thickness (mainly for the Nintendo Switch )
Have 2 versions for clearance of 0.2 and 0.3mm
Print Size：60 x 165 x 10 mm
Can fold into 60 x 93 x 10 mm
Prints in a single piece, no assembly or screws required
This stand works really well, but the swiveling support wouldn’t print right on my machine without supports and so I changed it to use a 45 degree angle so it wouldn’t be trying to print on nothing. I also changed the holes where the 2nd part of the stand go into so it would stay better.
I remixed „8Bitdo SF30 (SN30) Pro Grip 2.0 by DavidSL448“ to be able to print it without supports (except for the „arc“)
Also the rear „arc“ can be printed sideways and thus much stronger.
You’ll need to glue the 4 parts, I used gel super glue (Super Gel by Pattex)
Face mask to protect against air born viruses like coronavirus. Mask is not a one-size-fits-all. You may need to print at different scales to see which one works best.
Inspired by face mask from https://longliveyoursmile.com/3d-printable-mask-for-covid-19/
Features:
-Easy to clean design (no threads or complex parts)
-Comfortable fit (smoother, thicker contours and edges)
-Dual filters (use N95 particle sheets or round cotton pads)
-Moisture trapper (reduce moisture buildup at chin)
-Easy to breathe (Up to 300 cc of volume)
Instructions:
Scale to size for:
-Small – 95%
-Medium – 100%
-Large – 105%
1) Print with front of mask facing down on build plate with no supports.
Please see picture above.
2) Sand down any rough edges with 220 grit sandpaper.
3) Attach 1/4″ flat elastic bands to the mask.
See picture above for an example on how to attach.
4) Press fit filter sheets using an inner ring for each vent.
Optional:
1) Use a hair dryer to heat up edges and contour to your face.
2) Initial your masks in case you have more than one in the family.
Printing time: 3-6 hours depending on size
Disclaimer: This is not a replacement for proper N95 masks. If you can get your hands on N95 masks, please do so and use those. If you cannot, then having this is better than none.
Please comment on your fitment and any issues you had. Thank you.
Yet another face shield.
Fast and light 3D printed Face shield.
Changelog:
rev0.6: adjusted autolock, more flexible
28/03/2020 added STEP files!
Easy to mount A4 acrylic sheets. Tested with 0,10 to 0,24mm thickness.
Just slide the A4 sheet in and close it.
Assembly: https://www.youtube.com/watch?v=xsc1RIfQK8s
Hello, today I want to introduce you to „Fluffy the Unicorn“, the stuffed animal of Agnes in the movie Despicable Me, as always easy to print and very clean print, resize to your liking and enjoy printing, I hope you like it.
Best regards
Despicable Me – Collection
https://www.thingiverse.com/Alsamen/collections/despicable-me
Remix for multi-material printers.
Original model by Alsamen:
https://www.thingiverse.com/thing:3835952
A bad ass devil straight from the gates of hell!
He is printable without support. I have printed him in several sizes and the print turns out fine in 0.1 and 0.3 layer height.
The print is perfect for anyone who is into painting sculpts ( I highly recommend Quick Shade paint to bring out the details even more).
Sculpted in Zbrush. Approx 40-50 h sculpting.
Hope you like it!
Cheers
/Ola
A creature in a astronaut suit.
The balls on the suit is removed in this version. other than that it’s the same as in the pictures.
450k polys. Printable without support.
ZombieHunter is back!
500k polys. Printable without support.
