Autor: SmashD

A case for the Xiaomi Wowstick that fits all the bits and more. Bits are can be held on with magnets for extra security.

Check out this model and my other work on PrusaPrinters

• Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare)
• Holds the magnetizer/demagnetizer thingy
• Has a small pocket for carying miscellaneous items, plus 7 more slots in the lid, where you can put screws when working
• Magnets can be added mid-print to hold the bits in place more securely
• Easily editable parametric design for Fusion 360

This is a remix of https://www.thingiverse.com/thing:4732869.

The original lids of the monster boxes where just a little bit to small. The initiative tokens tend to vary in size. I made the lids 0.5mm broader such that my initiative markers fit and dont get scratched.

Oh, and I added some text on one side of the box.

Print four of the character trays from here:
https://www.thingiverse.com/thing:4612926

I had to redesign the complete rest, because the initiative token are longer in the german edition. I made small boxes for all monsters (cards & token). The ‚lid‘ is the initiative token. The other cards come with more boxes, here and there it is a tight fight, but during the game more and more cards get added to the characters.
All other tokens are piled up in the three bowls (Schale_1, Schale_2, Token) which stack nicely.

I love the new expansion for Gloomhaven (Jaws of the Lion), but it is a really complex game with tons of components that can take a long time to unpack/repack before/after each game. I made this organizer/gameplay tray to keep everything organized and minimize set up time!

Everything fits in the box, but it does raise the lid by about 2-4 mm.

I have only stored this box horizontally, so I don’t know if the pieces will shift out of their trays if you store it vertically, but if you store it tightly, then everything should stay in place.

Note: the wedge and clip are for the enemy trays (print 2 of these, btw). The clip keeps the 2 halves of the enemy tray together, while the wedge makes it slightly more easy to get monster cards out of the tray.

Enjoy!

This is a mini organizer for Gloomhaven: Jaws Of The Lion. It works with the included insert to organize all of the monster tokens and cards as using the little resealable bags I found didn’t really work so well.

Things are very tight in that space, so the orientation and organization in the tray is not super logical – it’s based on the physical size of things.

The cards have optional dividers, which can be printed in 2 colors if desired (see the photos) to break everything up and allow quick access to the correct cards, but this is also a tight fit. Each of the dividers also has a mini locator on the front to point you to where the associated monster tokens are in the organizer.

I have included a number of photos to show how I have packed everything away so the box will close with no lift. This includes removing the character minis from their boxes (inspired by this video ).

The source code to generate this is available here: https://github.com/sillyfrog/Gloomhaven-Jaws-Of-The-Lion-Organizer (it’s horrible code, but maybe handy if you need to make a quick mod).

Update 2020-09-27

I have added in a couple of small condition token organizers for those that like to keep things super sorted – like us 🙂
This just fits into the tokens tray as shown, and has slots for all of the condition tokens. The source files will be uploaded shortly as well to github.

Update 2020-10-01

Hit Point tokens now have their own holders that fit in the original tray. Source files also on GitHub.

I’ve designed a collar that tightens around the top of the spray can using a zip tie or M4 nut and bolt, this mounting system coupled with an internal groove allows the handle to be perfectly secured to the spray can, without the risk of slipping and also makes the model really durable. To increase the durability further, the trigger is to be printed horizontally, and attaches to the handle with a M5x15mm bolt that acts as a pivot and a M5 nut.

If you don’t have a printer, you can print it from https://www.jawstec.com/3d-printing-service/ or another online printer.

Want to buy this item ready to use? Get it here:

https://www.etsy.com/listing/1092478613/spray-can-handle-to-end-them-all?ref=listings_manager_grid

I like how Ace_D remixed the Switch portrait holder with the comfortable grip. However after printing his design I found several issues. The right handle is largely separate from the center piece. The console fit is very tight. There is no bottom hold the console safely, only friction. The vent position is off. The back air intakes are blocked. The Joycons are not easily removed because the release button is largely blocked. So I decided to take things into my own hands and remix this remix.

Below are my design highlights:

The right handle is now solidly connected to the center piece.

The console holder now has a bottom to hold it safely.

The console holder now has a locking mechanism to keep the Switch in place

I have loosen the fit so your Switch won’t get scratched. Friction is no longer important thanks to the new bottom and lock.

I have filled the inaccurate vent holes and cut a perfect outlet for the vent and back air intakes. (Put Switch in power button up)

I have cut out part of the grips so the release button is more accessible.

I have lowered the center piece so the grip stands more stably now. Still I wouldn’t recommend letting it stand longer than than temporarily.

I would say the grip is quite nearly perfect. Enjoy your favorite portrait games! Raiden, 194x, pinball, Ikaruga, you name it!

I wanted to put a shotgun mic on a small Manfrotto desktop tripod but could not find a suitable adapter, so I designed one. This works for me, as in: holes and threads are scaled so they printed well with my printer. Play with the scaling function of your slicer if you experience problems.It may fit for you or it may not. Feel free to contact me if it doesn’t

Works wonderfully for me☺️

2019-07-05 – Adjusted inner thread and hole size to be less lose.

A top-mounted tea dispenser for bags with 65 mm x 75 mm.

Attach the mounting plate with two screws or double sided tape. Use the distance bracket if you want to mount them at the right distance from each other.

https://www.youtube.com/watch?v=4W2Ot_STJnU