Autor: SmashD

KEIN VERKAUF!

Für:

ESP8266
NRF 24L01+ ext. Antenne
SSD1106 1,3″ oder SSD1306 0,96″ OLED Display

Gehäuse ist verschraubbar.
Dafür wird ein Messing Gewindeeinsatz (einschmelzen) für eine
M4 Schraube ( ca 2cm lang) benötigt.

Der Druck funktioniert auch ohne Stützmaterial.
Die Rückwand liegend drucken.
Das Oberteil auf die Displayseite legen und drucken.
Das Unterteil so wie es ist.

Hey Everybody!
Since I’m making my own case for the Miyoo mini plus, I am also uploading my carefully measured reference model I made so other people can create their own case.

This is a combination of the Simple Steam Deck stand/wall mount by kwahoo and the Steam Deck Dock/Base for Anker 341 USB-C Hub (7-in-1) A8346 by SmashD.

It takes the Anker 341 USB C hub mounting solution from SmashD’s design and adds it to the back of kwahoo’s design, simple as that.

For reference if this will work for your hub, the small shelf that the USB C hub sits on is 117.5mm from end to end (the length of the hub) and 15.75mm wide (the thickness of the hub). The pitch angle of the Steam Deck holder (and the angle the hub holder was rotated to) is 15°.

Note: I don’t really use Thingiverse much anymore, so please go to the corresponding page on printables.com for more info, and more remixes by other people, like one with the arrows on top: https://www.printables.com/model/203612-modular-number-life-score-counter/

---

This is a remix of the great model https://www.thingiverse.com/thing:4778677 (which itself is loosely remixed from others, but has a much simpler digit ring design),
with the following changes:

• The left side and stem are separated into two pieces.
• I added a new middle piece which can be used as a separator (I personally prefer the „slim“ middle piece, but I’ve also included a „thick“ one).
• The stem length can be customized via parameters in the Fusion 360 file (I included a few sample lengths).
• All of these pieces can now easily be mixed and matched, so you’re not stuck
  with one layout (see the photo for some examples).

All necessary files (including the two versions of the digit ring) are included for your convenience.

Assembly:

Print one each of the left and right side, optionally one or more middle pieces, one stem of the correct length for your configuration, and the necessary copies of the digit ring (note that there are two versions, turning up- or downwards to count up).

The left and right end pieces fit very tightly onto the stem on purpose, but I’ve added some tolerance for the middle piece so it can be slid around. You should still be able to remove the ends with some gentle force, if you ever want to reconfigure your pieces.

Customization:

I’ve included the Fusion 360 file with all necessary parts, in case you want to
tinker more with it – like creating longer stems, or adding a logo, or adjusting the tolerance for the middle piece, etc.

Printing:

This should print quite easily with all materials, without any brim, raft or
supports. I recommend a smaller layer height for the digit rings (and possibly a
brim), but the main parts print well with 0.2 mm resolution.

Armas personalizadas con el rostro de personajes de películas de terror

Headphone stand with optional mouse bungee, of „bottom_nut“ there are two versions, the second one has a small holder for the Hyperx Cloud II controller.
It is necessary print 2 „screw_16“.

Ich habe hier eine Halterung für die Amazon Blink mini WLAN Kamera entworfen. Die Halterung wird auf der linken Seite an den 2 oberen Schrauben befestigt. Die Kamera kann mit dem original Kugelkopf einfach eingeklipst werden.

UPDATE:

Nun ist die Halterung auch in Verbindung mit „LED-Holder V.1.5 – ANYCUBIC I3 MEGA
by Hiob“ zu gebrauchen.

The complete bundle for 3d printer & 3d models stl file

Don’t forget to „Click A Like“ & check out my other Cool designs and Follow my Weekly dose of KooKoo uploads 😉

.
this is an updated version of my original design but with a working hinge 😉

BOM: (Bill Of Material)
2mm OD rod x 70mm L
Note: use the same rod to ream the hole in the hinges to the correct size

Accessories:

GAME: https://www.thingiverse.com/thing:2770543

PARA CORD GOODIES: https://www.thingiverse.com/thing:2774713

SEWING KIT: https://www.thingiverse.com/thing:2773357

SAW & BLADE: https://www.thingiverse.com/thing:2770206

CORD HOLDER: https://www.thingiverse.com/thing:2770523

ARROW HEADS: https://www.thingiverse.com/thing:2772221

BLADE SNAP CARDS: https://www.thingiverse.com/thing:2773170

SEWING AWL: https://www.thingiverse.com/thing:6215499

If you are interested in other prop firearms, Airsoft parts and designs do join our group on Matrix:
https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org

!!!Note: I’m always open for suggestion and help on improving the design and proof of concept.