Scaled the v3 remix AA version down to fit AAA batteries.
I do have just one single brand on hand and they measured 45 x 10,6 mm. Inner dimensions of the box width is 46+ mm and the diameter is fine everywhere.
Printing it right now and will add a comment if it’s NOT fitting, but it should. 🙂
Please measure your batteries and adjust the scale accordingly.
A fast to print filament dust remover box. Just stuff some microfiber cloth oder foam into the box, place around the filament, put another layer of cloth/foam above and close it. Can also be used while the filament is already mounted.
EDIT: added a v2 with half-circle arms for the lid, which greatly reduce the risk of breaking when removing the lid again. This thing is rather tiny, so are the walls, really depends on your filament if v1 works or not. 😉
just made them a little less deep, still function perfectly fine 😉
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow (about 1mm each side, so no snug fit, more a „no-fit“, may be due to my printer). The „socket box“ fitted nicely though.
Added some hex holes, no real purpose for them though 😀
Looks ok, prints ok, no support needed.
Sorry if something is weird or off – this is my first model/remix.
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow.
Added cut-outs for less material use to the main body.
Made the clip more flexible and replaceable, because mine broke the first time in use.
Make sure you print them as provided (don’t rotate), so the print lines support the clip’s bend direction!
I have removed some material to make it a faster print.
I removed the curved bit, nothing else, because having to print all the support for more removal was taking as long as not removing anything in the first place 😉
In case you need a caliper, I have chosen a Turata:
Amazon DE: https://amzn.to/2QCMiD7
Amazon GB: https://amzn.to/30WXZcx
Amazon US: https://amzn.to/2EP1DM6
*Affiliate links, if it’s ok for you. Prices stay the same, but I get a (very) small amount for telling you the link.
I have added some height and 3 little notches so the dampeners wont fall out.
I had those shock absorbers already, so I have chosen this design over the squash ball thing – and they are working very well.
In case you want to buy them, they are called „OEHLBACH Shock Absorber, elastisch schwarz (55038)“. They are not so common outside Germany, I guess, but here are some links.
Amazon Links*:
DE: https://amzn.to/2XyQ03y
UK: https://amzn.to/2Kw4PQn
US: not found
*The used link is a so-called affiliate one. When you buy the product using this link, I will receive a small provision. The price itself does not change because of the affiliation. Thanks for your support 🙂
My first project made in Fusion 360: 10 ml 7×2 E-Liquid / Aroma Bottle Stand
Print with 100% Infill to get perfect circles (0.4 nozzle), takes only about 68 minutes for 174 x 49 x 5 mm.
As I am new to 3D printing and modeling – this is fine, is it?
UPDATE
After printing it now I am realizing: you may want to print it in 105%, so more bottles fit due to the extra 1 mm in diameter.
UPDATE 2
I have added a second version fittong slightly larger bottles.
Remixed using Windows 10 3D Builder …
I have added place to fill up with hot glue, hopefully providing slide resistance and probably reducing vibrations transferring to the furniture – we’ll see 🙂
