Kategorie: Medien

Veröffentlicht am

PSVR HDMI Support and Clip (replaceable) solid

Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.
  • On mobile devices 3 finger horizontal swipe performs panning.

Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones in the original were way to narrow for me.

REMOVED cut-outs for cleaner prints and not bombarding the poor printer with retractions. 😉

Made the clip more flexible and replaceable, because the fixed one (one solid cable clip) broke the first time in use.
Make sure you print them as provided (don’t rotate), so the print lines support the clip’s bend direction, otherwise the bending could separate the layers!

Veröffentlicht am

Liked on YouTube: True Facts: Mating Dance of the Ostrich

Inside the mind of the Dstrich.
Support this madness: https://ift.tt/2OIABuj
CREDITS:
By Ze Frank
All media used under license and with permission:
Footage of the Ostrich: Jackson Hart Grady https://youtu.be/IpCXzpeIIco
6 Audio Track from Tom Moore: https://ift.tt/1f0eB5Y
Voice of Female Ostrich: Caitlin Roukin
Voice of Male Ostrich, Host: Ze Frank
„Ostrich Song“ Written and Performed by Ze Frank

via YouTube True Facts: Mating Dance of the Ostrich

Veröffentlicht am

Liked on YouTube: Bluetooth LE Audio and the LC3 Audio Codec

Until now, all Bluetooth Audio used Bluetooth Classic from the Bluetooth 2.0 and 3.0 days. Bluetooth 4.0 introduced Bluetooth Low Energy (BLE). But that was almost a decade ago. Since its launch there has been no official solutions for audio over BLE. That all changed today with the launch of Bluetooth Low Energy Audio (LE Audio) and the new LC3 codec.

Introduction to Android app development: https://ift.tt/2jqUt5L

Let Me Explain T-shirt: https://ift.tt/2OTwwBI

Twitter: https://twitter.com/garyexplains
Instagram: https://ift.tt/2GwvXNL

#garyexplains

via YouTube Bluetooth LE Audio and the LC3 Audio Codec

Veröffentlicht am

Liked on YouTube: LEGO® Creator Expert 10260 – Downtown Diner – Bauabschluss

Creator – erschienen 2018 – 2454 Teile

Dieses Set bei Amazon*:
http://amzn.to/2IyyXHq

Erwähnt im Video*:
Legoredo http://amzn.to/2FUoj0g
10252 http://amzn.to/2IGALhN
10703 http://amzn.to/2GPM2vN
42009 http://amzn.to/2G9gHWS
42043 http://amzn.to/2G0Usz6
70810 http://amzn.to/2pssp4y
71006 http://amzn.to/2G2hLsp

Ersatzteile & Figuren:
https://ift.tt/2pFEVgp

Ein paar Sets:
https://ift.tt/2p8EauF

https://ift.tt/2oYblVC
https://ift.tt/2pFDJtm
Held der Steine – Inh. Thomas Panke
069-95863972
Laubestr. 26
60594 Frankfurt am Main

*Die Links zu Amazon sind Affiliate-Links. Die Angebote bei Amazon stammen nicht von mir, allerdings erhalte ich durch den Verweis eine Provision, wenn dann ein Kauf stattfindet, jedoch ohne dass Euch zusätzliche Kosten entstehen.
Wenn Ihr klickt und kauft: vielen Dank! 🙂

via YouTube LEGO® Creator Expert 10260 – Downtown Diner – Bauabschluss

Veröffentlicht am

Liked on YouTube: Adam Savage’s One Day Builds: Gaslamp Lantern Prop!

Happy new year! We kick off 2020 with a new One Day Build from Adam’s cave. Adam’s making a gaslamp-inspired lantern using to coincide with a future project, and the lighting and electronics are something you can follow along to apply to your own builds!

Find the parts for this build below:
Flame Effect Light Bulb https://amzn.to/2MMFCSp
Lantern https://amzn.to/2QEmRkT
Electrical Tape https://amzn.to/37qcVSX
Switch https://amzn.to/35dlcbm
Matt Clearcoat https://amzn.to/2SI00Yt
Black Primer https://amzn.to/36f4FVN
AA battery holder https://amzn.to/36gQDmt
Hermaphroditic velcro https://amzn.to/2Fdd93Y

Disclaimer: Tested may earn an affiliate commission when you buy through the links here.

Shot and edited by Gunther Kirsch

Subscribe for more videos! http://www.youtube.com/tested
Follow us on Twitter: http://www.twitter.com/testedcom
Get updates on Facebook: https://ift.tt/1oBbt7v

Tested is:
Adam Savage http://www.twitter.com/donttrythis
Norman Chan http://www.twitter.com/nchan
Simone Giertz http://www.twitter.com/simonegiertz
Joey Fameli https://ift.tt/1Aw0dMs
Gunther Kirsch https://ift.tt/2JbCkDg
Ryan Kiser https://ift.tt/2NCzsTo
Kishore Hari http://www.twitter.com/sciencequiche
Sean Charlesworth http://www.twitter.com/cworthdynamics
Jeremy Williams http://www.twitter.com/jerware
Kayte Sabicer https://twitter.com/kaytesabicer
Bill Doran https://twitter.com/chinbeard
Ariel Waldman http://www.twitter.com/arielwaldman
Darrell Maloney http://www.twitter.com/thebrokennerd83
Jen Schachter https://twitter.com/schac_attack
Kristen Lomasney https://twitter.com/krystynlo

Intro bumper by Abe Dieckman
Set design by Danica Johnson http://www.twitter.com/saysdanica
Set build by Asa Hillis https://ift.tt/2izUF50

Thanks for watching!

via YouTube Adam Savage’s One Day Builds: Gaslamp Lantern Prop!

Veröffentlicht am

Fanatec Wheel Stand with Quick Release Mount

Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.
  • On mobile devices 3 finger horizontal swipe performs panning.

I wanted a place where I could store my spare/currently unused Fanatec wheel but did not want to just lean it against or mount it onto a wall.

So I’ve tried to create a stand similar to some of those headphone stands you can find here as well.

I have used the Fanatec wall mount adapter by blazze11 (see remix section) and attached it onto a self-made stand which was done in Fusion 360. Not knowing how sturdy the end result would be in PLA I have made it relatively thick and used 20% infill.
The main stand’s pillar is tilted back so the wheel’s center of gravity is a little more towards the back as well and the whole thing isn’t too front-heavy and won’t easily be tipped over.

The end result seems fine overall but as always feel free to modify it – please post it as a remix though, I am curious about your ideas as well!

Printing with the Anycubic Mega-S I had to pretty much max out the maximum build volume, so I had no more space for brim or skirt – adjust your slicer settings accordingly or use the 3mf file to scale the stand itself a little if you have to. Don’t forget to move the quick release mount to an appropriate position if you modify the stand, though.
I have made the stand the way it is so scaling it only in eg. Z direction won’t be too noticeable.

STL: one object, print this if you do not have to make size adjustments
3MF: multiple objects, scale down the stand if you have to, move the quick release mount to the new position and save as single object/merged to print

Despite its size the print only took about 7 hours.

Oh, the hole at the back is for storing the allen wrench / hex key that is needed for the CSL Elite wheel. I should have made a second hole to store the screw as well, but I noticed it tends to slip out of the semi quick release mechanism after everything was done … 😉

Veröffentlicht am

Fanatec CSL Elite Base Rev LED Dimming Plate

It’s great to have such bright LEDs. However I mostly don’t do manual shifting, so they are drawing too much attention. So I’ve designed this Revolution LED Dimming Plate.

The amount of dimming is directly related to your choice of filament, just scale the STL in Z direction to accommodate for that.

I printed this using Redline Filament Glitzer PLA Eisengrau.
I have bought M6x10 screws in black, because standard philips screwheads in shiny silver just didn’t fit aesthetically.

Redline Glitzer Filament PLA 1,75mm Eisengrau: https://amzn.to/2qT4tvR
M6x 10mm Button Head Innensechskant schwarz: https://amzn.to/2RVeAeE
Zylinderschrauben M6x10 DIN 912 10 Stück schwarz: https://amzn.to/2YOjAmO

Those URLs are affiliate links. When you buy the product using this link, I will receive a small provision. The price itself does not change. Thanks for your support 🙂